PFA Tubing Transparent, gastight tubing Product advantages: » non-porous » almost universal chemical resistance » free from extractable agents » physiologically safe » non-adhesive surface » very good sliding characteristics » very good dielectric characteristics » biocompatibility certified according to USP class VI » flame retardant according to UL94V0 » oxygen value more than 95 » resistant to irradiation and weather » can be...
PFA Tubing Transparent, gastight tubing Product advantages: » non-porous » almost...
PFA Tubing Transparent, gastight tubing Product advantages: » non-porous » almost universal chemical resistance » free from extractable agents » physiologically safe »...
Flat Flange Reaction Vessels Flat bottom, translucent, non-porous, big opening. Can be heated by thermostats or an electric heating mantle or can be used with a heatable magnetic stirrer and a PTFE-encapsulated magnetic stirring bar for stirring.
Flat Flange Reaction Vessels Flat bottom, translucent, non-porous, big opening. Can be...
Flat Flange Reaction Vessels Flat bottom, translucent, non-porous, big opening. Can be heated by thermostats or an electric heating mantle or can be used with a heatable...
Stirrer Shafts with One Paddle PTFE-jacketed stainless steel shaft, paddle completely made of PTFE with two 45° angled blades. Universal chemical resistance since the product is only exposed to PTFE. Applications: The product is sucked bottom-up, very good axial flow with low shear force.
Stirrer Shafts with One Paddle PTFE-jacketed stainless steel shaft, paddle completely...
Stirrer Shafts with One Paddle PTFE-jacketed stainless steel shaft, paddle completely made of PTFE with two 45° angled blades. Universal chemical resistance since the product...
(Distributors for Reaction Vessels (S Blue screw cap made of PP with GLS 80 thread, body made of PP with center ground joint and lateral GL-threaded necks. Restricted chemical resistance, for working temperatures up to max. +110°C Applications: Drawing or inserting aggressive or pure liquids. Inserting tubing, tubes and probes into vessels. Use of a stirrer bearing (see page 36) in center neck for centrical position of a stirrer shaft.
(Distributors for Reaction Vessels (S Blue screw cap made of PP with GLS 80 thread,...
(Distributors for Reaction Vessels (S Blue screw cap made of PP with GLS 80 thread, body made of PP with center ground joint and lateral GL-threaded necks. Restricted chemical...
Micro Surface Stirrer Shafts PTFE-jacketed stainless steel shaft, blade completely made of PTFE with four round paddles. Universal chemical resistance since the product is only exposed to PTFE. Applications: Ideal for stirring in test tubes or narrow-mouth vessels, optimum mixture in round vessels and in vessels with low fill level.
Micro Surface Stirrer Shafts PTFE-jacketed stainless steel shaft, blade completely...
Micro Surface Stirrer Shafts PTFE-jacketed stainless steel shaft, blade completely made of PTFE with four round paddles. Universal chemical resistance since the product is only...
Round Bottom Flasks with Threaded GL Necks Transparent, non-porous, central ground joint neck size 29 and 2 lateral GL 18 threaded necks (suitable laboratory screw joints with Cat. No. D 629-.. can be found on page 69). Conditionally suitable for vacuum, e.g. at 30 mbar and 50°C.
Round Bottom Flasks with Threaded GL Necks Transparent, non-porous, central ground...
Round Bottom Flasks with Threaded GL Necks Transparent, non-porous, central ground joint neck size 29 and 2 lateral GL 18 threaded necks (suitable laboratory screw joints with...
GLS-Reductions Blue screw cap made of PP with GLS 80 thread, movable insert with GL 45 thread made of PTFE. Transition from GLS 80 bottles to a GL 45 thread. The body can be moved independently from the screw cap so that the completely assembled reduction can be removed and fixed on another vessel without the risk of disarranging the tubing or cable. The product is only exposed to PTFE.
GLS-Reductions Blue screw cap made of PP with GLS 80 thread, movable insert with GL 45...
GLS-Reductions Blue screw cap made of PP with GLS 80 thread, movable insert with GL 45 thread made of PTFE. Transition from GLS 80 bottles to a GL 45 thread. The body can be...
Distributors for Canisters Distributors for canisters with movable body and GL- threaded necks. Applications: Drawing or inserting aggressive or pure liquids. Inserting tubing, tubes and probes into canisters.
Distributors for Canisters Distributors for canisters with movable body and GL-...
Distributors for Canisters Distributors for canisters with movable body and GL- threaded necks. Applications: Drawing or inserting aggressive or pure liquids. Inserting...
Multiple Distributors for Bottles Black/blue screw cap for thread according to chart below. Body made of PTFE
Multiple Distributors for Bottles Black/blue screw cap for thread according to chart...
Multiple Distributors for Bottles Black/blue screw cap for thread according to chart below. Body made of PTFE
Buchner Funnel, PTFE Material: PTFE Temperature resistance: -200°C to +250°C / Chemical resistance: +++ universal Vacuum: suitable autoclave: 121° Product description Made of PTFE. Two-part version demountable in upper and lower part for easy cleaning and removal of filter cake. Suitable for vacuum filtration. Nominal sizes and dimensions as per DIN 12 905. Suitable for commercial filter papers (not included in the scope of delivery)....
Buchner Funnel, PTFE Material: PTFE Temperature resistance: -200°C to +250°C /...
Buchner Funnel, PTFE Material: PTFE Temperature resistance: -200°C to +250°C / Chemical resistance: +++ universal Vacuum: suitable autoclave: 121° Product description...
Impeller Stirrer Shafts PTFE-jacketed stainless steel shaft, impeller completely made of PTFE with three blades bent backwards, lower side of impeller either even or 15° angled. Universal chemical resistance since the product is only exposed to PTFE Applications: Very good and gentle stirring due to blades which are bent backwards, low shear force. The 15° angled impellers are ideal for stirring in vessels with round bottom.
Impeller Stirrer Shafts PTFE-jacketed stainless steel shaft, impeller completely made...
Impeller Stirrer Shafts PTFE-jacketed stainless steel shaft, impeller completely made of PTFE with three blades bent backwards, lower side of impeller either even or 15°...
GL-Stopcocks EX Two-way stopcock made of conductive PTFE-EX with straight bore and two connections with GL thread or three-way stopcock with L-shaped or T-shaped bore and three connections with GL thread. Cylindrical stopcock plug made of conductive PTFE-EX for good tightness, stop valve with mark of flow direction. Grip made of red PP. Suitable for pressure up to max. 6 bar, suitable for vacuum. Connection of tubing or tube with BOLA...
GL-Stopcocks EX Two-way stopcock made of conductive PTFE-EX with straight bore and two...
GL-Stopcocks EX Two-way stopcock made of conductive PTFE-EX with straight bore and two connections with GL thread or three-way stopcock with L-shaped or T-shaped bore and three...