כלי טפלון יש 172 מוצרים
תת קטגוריה
זמיןמתאם הברגה GL טפלון
Threaded Couplings Two screw caps made of PPS (up to +250°C) or PBTP (+180°C) with GL thread and a PTFE/FPM gasket. Connection piece made of PTFE. The product is only exposed to PTFE. For connecting two GL threads of the same size
Threaded Couplings Two screw caps made of PPS (up to +250°C) or PBTP (+180°C) with GL...
Threaded Couplings Two screw caps made of PPS (up to +250°C) or PBTP (+180°C) with GL thread and a PTFE/FPM gasket. Connection piece made of PTFE. The product is only exposed...
זמיןמגנט משולש מצופה טפלון C357
Triangular Magnetic Stirring Bars PTFE-encapsulated magnetic core (Alnico 5), universal chemical resistance. Applications: For big vessels, strong turbulence at relatively low speeds. Useful for mixing reagents which resist dissolving or for avoiding any residues at the bottom of the vessels.
Triangular Magnetic Stirring Bars PTFE-encapsulated magnetic core (Alnico 5),...
Triangular Magnetic Stirring Bars PTFE-encapsulated magnetic core (Alnico 5), universal chemical resistance. Applications: For big vessels, strong turbulence at relatively...
זמיןמוט בחישה מיני פרופלור טפלון C482
Mini-Propeller Stirrer Shafts PTFE-jacketed stainless steel shaft, propeller completely made of PTFE with three 45° angled angular blades. Universal chemical resistance since the product is only exposed to PTFE. Applications: The product is sucked bottom-up, good axial flow with low shear force. The small stirring diameter allows stirring in narrow mouth vessels or in vessels with ground joint openings.
Mini-Propeller Stirrer Shafts PTFE-jacketed stainless steel shaft, propeller...
Mini-Propeller Stirrer Shafts PTFE-jacketed stainless steel shaft, propeller completely made of PTFE with three 45° angled angular blades. Universal chemical resistance since...
זמיןראש פלאנש טפלון PTFE
Flat Flange Lids One-piece, 3 declined lateral ground joint necks size 29 angled 15°
Flat Flange Lids One-piece, 3 declined lateral ground joint necks size 29 angled 15°
Flat Flange Lids One-piece, 3 declined lateral ground joint necks size 29 angled 15°
זמיןמפצל הברגה טפלון לצינור עם ובלי ברז
Distributors for Bottles Black screw cap made of PPS for bottle thread GL 45. Without stopcocks: body made of PTFE with 2 or 4 ports with female thread UNF ¼” 28G on upper and lower sides. With stopcocks: body made of PTFE with 2 or 3 ports with female thread UNF ¼” 28G on upper and lower sides and stopcock made of FEP for each port. A possible unevenness of the bottle neck is adjusted by an o-ring behind an elasitc sealing lip and the bottle...
Distributors for Bottles Black screw cap made of PPS for bottle thread GL 45. Without...
Distributors for Bottles Black screw cap made of PPS for bottle thread GL 45. Without stopcocks: body made of PTFE with 2 or 4 ports with female thread UNF ¼” 28G on upper and...
זמיןשסתום שליטת לחץ טפלון לחבית
Barrel Aeration Consisting of a body made of PTFE for female thread R ¾” with a GL 32 thread, a PTFE/silicone gasket, an exchangeable filtering membrane (2,5µm) made of PTFE and a screw cap made of PPS. Very good chemical resistance, the product is only exposed to PTFE. Applications: For pressure compensation during filling or drawing of liquids. Integrated membrane prevents contamination of the product. Membranes are available separately...
Barrel Aeration Consisting of a body made of PTFE for female thread R ¾” with a GL 32...
Barrel Aeration Consisting of a body made of PTFE for female thread R ¾” with a GL 32 thread, a PTFE/silicone gasket, an exchangeable filtering membrane (2,5µm) made of PTFE...
זמיןמתאם הברגה צורת L טפלון לצינור
GL Tube Fittings Elbow Tube fitting elbow-shaped made of PTFE, two connections with GL thread. Universal chemical resistance, the product is only exposed to PTFE. Application: For distributing liquids or gases. As reduction for connecting different diameters of tubes or tubing.
GL Tube Fittings Elbow Tube fitting elbow-shaped made of PTFE, two connections with GL...
GL Tube Fittings Elbow Tube fitting elbow-shaped made of PTFE, two connections with GL thread. Universal chemical resistance, the product is only exposed to PTFE. Application:...
זמיןצנרת טפלון אנטי סטטי PTFE-EX
Antistatic Explosion-Proof Tubing Very good electric conductivity due to a special “antistatic compound” made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black Applications: » antistatic applications » in explosive ambiance (explosion protection) » for transport of solvents or alcohols
Antistatic Explosion-Proof Tubing Very good electric conductivity due to a special...
Antistatic Explosion-Proof Tubing Very good electric conductivity due to a special “antistatic compound” made of pure PTFE and finest, highly pure carbon dust (less than...
זמיןכוריות טפלון
Crucibles Thick-walled, with ground joint.
Crucibles Thick-walled, with ground joint.
Crucibles Thick-walled, with ground joint.
זמיןכנף פרופלור 3 להבים טפלון C440
Stirrer Blades - Propeller These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA Stirrer Shafts by means of the clamp screws. A spanner wrench is included for easy assembly. Applications: The product is sucked bottom-up, good axial flow with low shear force.
Stirrer Blades - Propeller These solid stirrer blades are made of PTFE and have a set...
Stirrer Blades - Propeller These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA...
זמיןמתאם הברגה טפלון להקטנת GL
Reducing Screw Thread Adaptor Couplings Two screw caps made of PPS with GL thread and a PTFE/FPM gasket. Connection piece made of PTFE. The product is only exposed to PTFE. For connecting two GL threads of different sizes
Reducing Screw Thread Adaptor Couplings Two screw caps made of PPS with GL thread and...
Reducing Screw Thread Adaptor Couplings Two screw caps made of PPS with GL thread and a PTFE/FPM gasket. Connection piece made of PTFE. The product is only exposed to PTFE. For...
זמיןכנף פרופלור 4 להבים טפלון C448
Stirrer Blades - Propeller with 4 Blades These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA Stirrer Shafts by means of the clamp screws. A spanner wrench is included for easy assembly. Applications: The product is sucked bottom-up, good axial flow with low shear force.
Stirrer Blades - Propeller with 4 Blades These solid stirrer blades are made of PTFE...
Stirrer Blades - Propeller with 4 Blades These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed...
