כלים למעבדה יש 820 מוצרים
מגוון רחב של כלים למעבדה - זכוכית, פיירקס, נירוסטה, קוורץ, טפלון, פלסטיק, פורצלן, אלסינט ועוד.
כלי המעבדה מיובאים מחברות גרמניות ועומדים בתקנים הבינלאומיים הנדרשים.
לכלים מכויילים Class As מצורפת תעודה.
קיימת אפשרות לייצור כלים מזכוכית פיירקס לפי דרישה ושרטוט וכן, ניתן לצפות כלים בציפוי מגן שקוף.
תת קטגוריה
זמיןמשפך מיקרו עם סינטר, Pregl
Micro-Filter Funnels, according to Pregl for filtration of very small volumes with unground joint
Micro-Filter Funnels, according to Pregl for filtration of very small volumes with...
Micro-Filter Funnels, according to Pregl for filtration of very small volumes with unground joint
זמיןמשפך בטיחות HDPE עם בקרת מילוי מכנית והארכה
S 60 Thread with freely rotatable closure 9,75 litres throughput per minute Level control responds from 8 to 8,5 litres* 1,5 litres filling buffer when the level control starts moving when using a 10 litres container Electrostatic conductive PE-HD Drip edge prevents from fluid deposition at the closure Hinged Lid with click-closure Removable Sieve Grounding cable and clamp included
S 60 Thread with freely rotatable closure 9,75 litres throughput per minute Level...
S 60 Thread with freely rotatable closure 9,75 litres throughput per minute Level control responds from 8 to 8,5 litres* 1,5 litres filling buffer when the level control...
זמיןמבחנות צנטריפוגה עגול LD-PE
Round centrifuge tubes made of Low-Density Polyethylene (LD-PE), for use in refrigerated centrifuge up to 10,000 x g at 4 °C
Round centrifuge tubes made of Low-Density Polyethylene (LD-PE), for use in...
Round centrifuge tubes made of Low-Density Polyethylene (LD-PE), for use in refrigerated centrifuge up to 10,000 x g at 4 °C
זמיןמזרק זכוכית מיקרו ליטר עם מחט קבועה
Microsyringes Series N with fixed needle for dispensing of liquids in gas chromatography , HPLC-valves and autosamplers. Glass barrel made of borosilicate glass with stainless steel plunger Type Needle tip « a » is designed for optimum penetration of the septa. 17° bevel Needle tip « b » is designed for HPLC sample injection. 90° bevel Needle tip « d » with side opening is designed for dispensing and filling. Ideal for thicker septa and...
Microsyringes Series N with fixed needle for dispensing of liquids in gas...
Microsyringes Series N with fixed needle for dispensing of liquids in gas chromatography , HPLC-valves and autosamplers. Glass barrel made of borosilicate glass with stainless...
זמיןכפפת PVC לטמפרטורת נמוכות
Glove PVC מיוצר מ PVC, חלק פנימי עם כותנה אורך 300 מ"מ עמיד עד מינוס 20 מעלותא מתאים לעבודה בסביבה מקוררת יחידות באריזה: זוג אחד
Glove PVC מיוצר מ PVC, חלק פנימי עם כותנה אורך 300 מ"מ עמיד עד מינוס 20 מעלותא...
Glove PVC מיוצר מ PVC, חלק פנימי עם כותנה אורך 300 מ"מ עמיד עד מינוס 20 מעלותא מתאים לעבודה בסביבה מקוררת יחידות באריזה: זוג אחד
זמיןארלנמייר עם הברגה
Erlenmeyer flasks with screw cap graduated, for storrage of culture media and mixing, made of borosilicate glass
Erlenmeyer flasks with screw cap graduated, for storrage of culture media and mixing,...
Erlenmeyer flasks with screw cap graduated, for storrage of culture media and mixing, made of borosilicate glass
זמיןמשפך סינון עם ברז ולטש
Funnel ST cone and ST stopcock, with screw-thread retaining nut, made of borosilicate glass
Funnel ST cone and ST stopcock, with screw-thread retaining nut, made of borosilicate...
Funnel ST cone and ST stopcock, with screw-thread retaining nut, made of borosilicate glass
זמיןמשורה פיירקס B תחתית פלסטיק עם לטש
Graduated cylinder with plastic base - Class B made of borosilicate glass 3.3 tall form (standard) or low form available standard with spout, also available with screw threaded neck or PE-stopper graduation: DIFFICO brown (standard), DIFFICO blue on request neck: with spout, screw thread or ground joint tolerance according to DIN EN ISO 4788 DE-M marked according to the German calibration law
Graduated cylinder with plastic base - Class B made of borosilicate glass 3.3 tall...
Graduated cylinder with plastic base - Class B made of borosilicate glass 3.3 tall form (standard) or low form available standard with spout, also available with screw...
זמיןכנף פרופלור 3 להבים טפלון C440
Stirrer Blades - Propeller These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA Stirrer Shafts by means of the clamp screws. A spanner wrench is included for easy assembly. Applications: The product is sucked bottom-up, good axial flow with low shear force.
Stirrer Blades - Propeller These solid stirrer blades are made of PTFE and have a set...
Stirrer Blades - Propeller These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA...
זמיןמשורה PP כיול כחול
Graduated cylinder (Tall shape, transparent, with blue graduation, made of Polypropylene (PP
Graduated cylinder (Tall shape, transparent, with blue graduation, made of...
Graduated cylinder (Tall shape, transparent, with blue graduation, made of Polypropylene (PP
זמיןמתאם הברגה טפלון להקטנת GL
Reducing Screw Thread Adaptor Couplings Two screw caps made of PPS with GL thread and a PTFE/FPM gasket. Connection piece made of PTFE. The product is only exposed to PTFE. For connecting two GL threads of different sizes
Reducing Screw Thread Adaptor Couplings Two screw caps made of PPS with GL thread and...
Reducing Screw Thread Adaptor Couplings Two screw caps made of PPS with GL thread and a PTFE/FPM gasket. Connection piece made of PTFE. The product is only exposed to PTFE. For...
