כלי טפלון יש 172 מוצרים
תת קטגוריה
זמיןוייל טפלון
Vials, Conical Bottom, PFA Translucent, non-porous, with round or conical bottom, screw cap. Material: PFA Temperature resistance: from -200°C to +250°C Chemical resistance: +++ universal Pressure: no pressure Transparency: transparent Applications: For centrifugal or evaporation work.
Vials, Conical Bottom, PFA Translucent, non-porous, with round or conical bottom,...
Vials, Conical Bottom, PFA Translucent, non-porous, with round or conical bottom, screw cap. Material: PFA Temperature resistance: from -200°C to +250°C Chemical resistance:...
זמיןאטם לריאקטור טפלון
Flat Flange Gaskets Gasket with silicone inlet (thickness 0,5 mm). Universal chemical resi - stance, since the product is only exposed to PTFE
Flat Flange Gaskets Gasket with silicone inlet (thickness 0,5 mm). Universal chemical...
Flat Flange Gaskets Gasket with silicone inlet (thickness 0,5 mm). Universal chemical resi - stance, since the product is only exposed to PTFE
זמיןבית בוחש טפלון אנטי-סטטי
Stirrer Bearings EX, PTFE EX Material: PTFE EX Temperature resistance: from -200°C to +200°C Chemical resistance: ++ very good Conductivity: 10 kOhm Product description Cone made of PTFE-EX with elevated sealing rings for sealing in the socket. A special gasket made of PTFE-EX and an FPM o-ring which is compressed by GL screw cap provide a good sealing of the stirrer shaft. Bore with female thread M5 on the knurl for dissipating static...
Stirrer Bearings EX, PTFE EX Material: PTFE EX Temperature resistance: from -200°C to...
Stirrer Bearings EX, PTFE EX Material: PTFE EX Temperature resistance: from -200°C to +200°C Chemical resistance: ++ very good Conductivity: 10 kOhm Product description...
זמיןאטם טפלון כפול, עם חור ( ציפוי טפלון דו-צדדי )
Double-Sided Gaskets Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE. :Applications As gasket for BOLA Screw Caps with Aperture (Cat. No. H 983/ H 984/ H 995 on page 76). Also suitable for GL caps of company Duran Group
Double-Sided Gaskets Silicone ring with double-sided PTFE washer. After assembly, the...
Double-Sided Gaskets Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE. :Applications As gasket for BOLA Screw Caps with...
זמיןכנף ירח טפלון לטש 29 למוט בחישה מזכוכית C401
Moon-Shaped Stirrer Blades Completely made of PTFE, with angular groove. For vessels with a 29/32 ground joint. Applications: For glass stirrer shafts and KPG glass stirrer shafts (Cat.No. C 375- … on page 45).
Moon-Shaped Stirrer Blades Completely made of PTFE, with angular groove. For vessels...
Moon-Shaped Stirrer Blades Completely made of PTFE, with angular groove. For vessels with a 29/32 ground joint. Applications: For glass stirrer shafts and KPG glass stirrer...
זמיןמגנט ממורכז מצופה טפלון C367
Center Magnetic Stirring Bars PTFE-encapsulated magnetic core (Alnico 5), conically tapered ends, universal chemical resistance Applications: Extremely steady mixing due to small center seat.
Center Magnetic Stirring Bars PTFE-encapsulated magnetic core (Alnico 5), conically...
Center Magnetic Stirring Bars PTFE-encapsulated magnetic core (Alnico 5), conically tapered ends, universal chemical resistance Applications: Extremely steady mixing due to...
זמיןמפצל הברגה פלסטיק לבקבוק GL80
Multiple Distributors for Bottles Blue screw cap for thread according to chart below. Body made of PP
Multiple Distributors for Bottles Blue screw cap for thread according to chart below....
Multiple Distributors for Bottles Blue screw cap for thread according to chart below. Body made of PP
זמיןמפתח ברגים פלסטיק
Ring Wrench Ring wrench made of PP. Applications: For opening and closing BOLA Multiple Distributors for Barrels.
Ring Wrench Ring wrench made of PP. Applications: For opening and closing BOLA...
Ring Wrench Ring wrench made of PP. Applications: For opening and closing BOLA Multiple Distributors for Barrels.
זמיןבלוס טפלון
Bellows Made of PTFE, with sharp folds and sealing rings on the outside; maximum deflection: 120°. Applications: Strainless connection of ground joint equipment; for compensating vibrations from vacuum pumps; for length compensation of heated columns; angular misalignment.
Bellows Made of PTFE, with sharp folds and sealing rings on the outside; maximum...
Bellows Made of PTFE, with sharp folds and sealing rings on the outside; maximum deflection: 120°. Applications: Strainless connection of ground joint equipment; for...
זמיןאטם טפלון לפלאנש
Tri-Clamp Gaskets, Silicone, PTFE Material: PTFE Material: Silicone Temperature resistance: from -60°C to +230°C Chemical resistance: +++ universal Product description Silicone ring with double-sided, elastic washer made ofPTFE. Suitable for Tri-Clamp connections as per DIN 32 676. Universal chemical resistance, the flowing product is only exposed to PTFE. Applications Chemical inert, reusable gasket for Tri-Clamp connections as per...
Tri-Clamp Gaskets, Silicone, PTFE Material: PTFE Material: Silicone Temperature...
Tri-Clamp Gaskets, Silicone, PTFE Material: PTFE Material: Silicone Temperature resistance: from -60°C to +230°C Chemical resistance: +++ universal Product description...
זמיןצנרת טפלון גמישה PFA-EX
Flexible Tubing Ex Conductive corrugated tubing with nominal width 10 and with circular corrugations around the longitudinal axis. Cylindrical tubing ends with a length of 40 mm can for example be connected directly to fittings, stopcocks or hose connectors. Together with BOLA Laboratory Screw Joints EX, the connection is conductive, absolutely tight and suitable for vacuum. Product advantages: » conductive with surface resistance of 105...
Flexible Tubing Ex Conductive corrugated tubing with nominal width 10 and with...
Flexible Tubing Ex Conductive corrugated tubing with nominal width 10 and with circular corrugations around the longitudinal axis. Cylindrical tubing ends with a length of 40...
זמיןסט שסתומי שליטת לחץ טפלון לבקבוק
Sets for Pressure Compensation Consisting of screw cap made of PPS for GL thread, PTFE/silicone gasket and exchangeable filtering membrane made of PTFE (pore size 2,5 µm). High chemical resistance, the product is only exposed to PTFE. Pressure compensation already at 0,1 bar differential pressure. Applications: For pressure compensation during filling or drawing of liquids. Prevention of unintentional overpressure or vacuum in the vessel....
Sets for Pressure Compensation Consisting of screw cap made of PPS for GL thread,...
Sets for Pressure Compensation Consisting of screw cap made of PPS for GL thread, PTFE/silicone gasket and exchangeable filtering membrane made of PTFE (pore size 2,5 µm). High...
